Vollrath MPI4-1800S Manual Para Operadores página 6

Estufas de inducción de media potencia con sonda de control de temperatura
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION (CONTINUED)
Set the Timer (Optional)
1. Touch
.
2. The time will flash.
3. Touch
to set the time in 30 second increments.
After three seconds, timer will begin to count down and
flash to indicate the timer is in use.
4. When the timer reaches zero, a buzzer will sound and the display will
show END.
Change the Duration of Time
1. Touch
.
2. Then touch
or
Cancel the timer
x 2
Touch
.
6
will
.
Medium Power Countertop Induction Ranges with Temperature Control Probe Operator's Manual
Use the Temperature Control Probe (Optional)
The temperature control probe provides advanced temperature control.
The probe monitors the temperature of the food and then automatically
adjusts the output of the range as needed to heat the food to the
selected temperature. For best performance and food quality, stir the
food often when using the temperature control probe.
NOTE: The Temperature Control Probe is intended to provide a more
consistent and accurate cooking temperature. It is not intended to be
used as a thermometer for measuring the temperature of food.
Attach Probe and Insert into the Food
1. Use a soft clean cloth to wipe the tip of the probe. This is important
to keep the port clean and working properly.
2. Remove the cover from the temperature control port. Plug the probe
into the port.
3. Place the probe into the center of the food. Use the included clip to
secure the probe to the pan and suspend it in the center of the food.
Do not allow the probe to rest on the bottom of the cookware. For
accurate temperature control, the probe must be positioned into the
center of the food, and not touch the bottom of the pan.
Set the Temperature
1. Touch
repeatedly until
2. Touch
or
Heat the Food
1. The probe icon will flash as the food heats to the set temperature.
The display shows the set temperature.
Set temperature
2. The probe icon will change to a steady state when the probe detects
the food the reached the set temperature.
Set temperature
or
is selected.
to select a temperature.
Food is heating to
the set temperature.
Food has reached the
set temperature.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mpi4-1440s

Tabla de contenido