Installation instructions
GB
Dear customer,
You have purchased a high-quality and long-
lasting product from our line of goods. Please
read these instructions carefully before assem-
bling and observe the notes.
These instructions contain important infor-
mation on installation, adjustment, care, and
spare parts.
Therefore, keep the instructions in a safe place
and pass them on to possible subsequent
owners.
Proper use
This product is suitable for use with instanta-
neous water heaters. It is not suitable for low
pressure water heaters such as wood or coal
burning bath geysers, oil or gas bath geysers,
open electrically heated water tanks. Any use
other than that described here or modification
to the product is not permitted and may lead
to damage to persons or property. There is also
the risk of injury and loss of life. The product
is intended for personal use only and not for
medical or commercial use.
Safety notes
• Only allow experts carry out the installation
work.
• CAUTION DAMAGE BY WATER!
Prior to installation please turn the general
water supply off.
• Ensure that all gaskets have the correct fit.
• These taps are not suitable for use on low
pressure and small electrical storage heaters.
• We recommend the installation of a filter
into the appliance or at least the use of angle
valves with filter, in order to avoid the inflow
of foreign matter, which could damage the
upper parts of the valves.
• This tap is only intended for use in private
households! Only suitable for use in rooms
with a temperature over 0 °C, when there is
danger of frost, sut off the water supply and
empty the tap.
• If the tap not used for a longer period, we
recommend to initially let a larger quantity
of water flow through before withdrawing
water.
• Take care when adjusting the warm water.
Danger of scalding!
• Incorrectly installed fittings can cause water
damages!
• Please ensure that no caustic or corrosive
products such as detergents or household
cleaning products make contact with the
connection hoses; this can lead to water
damages.
• Despite careful production, sharp edges can
occur. Please exercise caution!
• DANGER OF LOSS OF LIFE AND ACCIDENT
TO INFANTS AND CHILDREN! Never leave
children unsupervised with the packaging
materials. Danger of suffocation.
• CAUTION! DANGER OF INJURY! Please
ensure that no parts are damaged and that
all parts are correctly assembled. Incorrect
assembly or fitting may lead to injury.
Damaged parts can adversely affect safety
and proper function.
• CAUTION DANGER OF WATER DAMAGE!
Before installation please ensure that there
are no water pipes where you are intending
to drill.
• Examine the wall before installation and
choose suitable installation fixings.
We have supplied fixings suitable for an ordi-
nary solid masonry wall.
• Please note that seals are wear parts and
therefore will require to be replaced from
time to time.
• Warning - risk of electrocution! Make sure
that there are no electrical power lines where
you are drilling before starting to drill holes.
6