Product Description; First Steps - testo 510 Manual De Instrucciones

14

Product description

Product description
At a glance

First steps

 Inserting batteries:
1 To open the battery compartment, push the battery cover
down.
2 Insert batteries (2x 1.5 V type AAA). Observe the polarity!
3 To close the battery compartment, push the battery cover
back on.
 Basic settings (configuration mode):
Adjustable functions
· Unit of pressure/velocity: hPa, mbar, Pa, mmH2O, mmHg, psi, inH2O, inHG,
m/s, fpm
· Only if a unit of velocity is selected:
Density of the medium (Density): Adjust flashing numbers with
the next number with
· Auto off function: OFF, ON (instrument switches off automatically if no key is
pressed for 10 minutes)
1 When switching the instrument on, press and hold
and
- The adjustable function is displayed. The current setting
flashes.
2 Press
3 Press
4 Repeat steps 2 and 3 for all functions.
- The instrument changes to measuring mode.
.
appear on the display (configuration mode).
( ) several times until the desired setting flashes.
( ) to confirm the input.

Protection cap: Park position

Differential pressure sensor
nipple connection

Display

Control keys

Battery compartment, holding
magnets (on rear)
, change to
until