Before The First Use; Using The Blender - Domo PIET HUYSENTRUYT DO443BL Manual De Instrucciones

DO443BL
PARTS
1. Lid with fill opening
2. Jar
3. Sealing ring
4. Blade assembly
5. Base of the jar
6. Motor unit
7. Speed knob
with pulse function (P)

BEFORE THE FIRST USE

1. Take the appliance out of the packaging
2. Disassemble the different parts of the appliance and clean all removable parts
according to the instructions described in the section 'Cleaning and maintenance'.
3. Reassemble all parts when they are dry:
1. Place the sealing ring at the inner edge of the blade assembly.
2. Place the blade assembly with the sealing ring in the base of the jar.
3. Make sure that the blender is turned off (position 0) and that the plug is not
plugged in.
4. Place the jar into the base of the jar and turn the base clockwise to fasten it
onto the jar.
5. Place the jar with its base into the opening at the top of the motor unit.
6. Press the lid onto the jar after adding the ingredients.

USING THE BLENDER

1. Peal the fruit or vegetables and cut them into pieces.
2. Put all foods that are to be blended into the jar. It is recommended to also
always add pure water to facilitate a smooth operation of the blender. The ideal
proportion of food/water is 2 to 3. The content of the jar should not exceed the
maximum indication on the jar.
Caution: Never use boiling liquids or do not use the blender when the jar is
empty.
1
2
3
4
5
6
7
30