Before The First Use; Using The Blender - Domo DO441BL Manual De Instrucciones

DO441BL
PARTS
1. Measuring cup
2. Lid
3. Jar
4. Sealing ring
5. Blade assembly
6. Motor unit
7. Speed knob
with pulse function (P)

BEFORE THE FIRST USE

1. Take the appliance out of the packaging
2. Disassemble the different parts of the appliance and clean all removable parts
according to the instructions described in the section 'Cleaning and maintenance'.
3. Reassemble all parts when they are dry:
1. Place the jar upside down on a level surface, hold the jar by the handle and
first put the sealing ring and then the blade assembly into the base of the jar.
Tighten the blade assembly by turning it counterclockwise.
2. Turn over the jar so that the base is at the bottom again
3. Tighten the lid onto the jar by turning it clockwise until it clicks.
4. Place the measuring cup into the top of the lid and turn it clockwise until it
is tightened.
5. Tighten the jar back onto the motor unit by aligning the
arrow on the jar with the lock on the motor unit and turning
the jar clockwise.

USING THE BLENDER

1. Peal the fruit or vegetables and cut them into small pieces.
2. Put all foods that are to be blended into the jar. It is recommended to also
always add pure water to facilitate a smooth operation of the blender. The ideal
proportion of food/water is 2 to 3. The content of the jar should not exceed the
maximum indication on the jar.
1
2
3
4
5
6
7
30
7