Radio; Starting Procedure; Basic Operation; Searching By Pty Information - Pioneer MVH-Z5050BT Manual De Instrucciones

Radio

Starting procedure

1
Press then touch .
2
Touch [Radio].
The Radio screen appears.

Basic operation

Radio screen
Recalls the preset channel stored to a key from memory.
Stores the current broadcast frequency to a key.
Displays the preset channel list.
Select an item on the list ([1] to [6]) to switch to the preset channel.
Selects the FM1, FM2, FM3, or AM band.
Performs BSM (best stations memory) function (page 20).
20
En
Manual tuning
Seek tuning or non stop seek tuning
Releasing the key in a few seconds skips to the nearest station from the
current frequency. Keep holding the key for long seconds to perform,
performs non stop seek tuning.
Searches for a broadcast by PTY information (page 20).
TIPS
• By pressing then touch or , you can also switch the preset channels.
• By pressing then touch and hold or

Searching by PTY information

You can tune into a station using PTY (Programme Type Identification) information.
NOTE
This function is available when the FM tuner is selected.
1
Touch .
2
Touch or to select the item.
3
Touch to start searching.
TIP
If you touch [Cancel], the searching process is cancelled.

Storing the strongest broadcast frequencies (BSM)

The BSM (best stations memory) function automatically stores the six strongest
broadcast frequencies under the preset channel keys [1] to [6].
NOTES
• Storing broadcast frequencies with BSM may replace those you have already saved.
• Previously stored broadcast frequencies may remain stored if the number of frequencies stored has
not reached the limit.
1
Touch to begin search.
While the message is displayed, the six strongest broadcast frequencies will be
stored under the preset channel keys in the order of their signal strength.
To cancel the storage process
1
Touch [Cancel].
and releasing it, you can also perform seek tuning.