Cleaning Instructions - Panasonic CS-S9VKV-2 Instrucciones De Operación

Cleaning instructions

To ensure optimal performance of the unit,
cleaning has to be carried out at regular intervals.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fin, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Air filters
Once every 2 weeks
• Wash/rinse the filters gently with water to avoid damage to the filter surface.
• Dry the filters thoroughly under shade, away from fire or direct sunlight.
• Replace any damaged filters.
Use support piece to support panel
before cleaning air filters
Front panel
(For S9/12/18VKV-2 models)
Wash gently and dry.
Remove the front panel
2 Lift to the level and pull out
1 Raise the panel
Close it securely
2 Push in
1 Insert at both sides
3 Close down
4 Press both ends and center of the front panel
22
ACXF55-21790_FC1806-00_S .indb 22
(For S24/28VKV-2 models)
Indoor unit
Aluminium fin
Front panel
Human
activity sensor Air filters
Outdoor unit
Clear debris that surround the unit.
Clear any blockage from drain
pipe.
Remove air filter
Front panel
(For S24/28VKV-2 models)
Wash gently and dry.
Remove the front panel
2 Remove the hook 1 Raise the panel
3 Lift to the level and pull out
Close it securely
3 Enclose the hook
1 Insert at both sides
4 Close down
5 Press both ends and center of the
front panel
Attach air filter
Insert into the unit
2 Push in
2019/4/24 10:12:54