Operating The Appliance - Gaggenau VG425211CA Manual De Instrucciones

Encimera a gas
Ocultar thumbs Ver también para VG425211CA:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Individual parts of the standard-output burner and
high-output burner
(
Burner cap
0
Burner ring
8
Burner head
@
Ignition plug
H
Thermocouple

Operating the appliance

O p e r a t i n g t h e a p p l i a n c e
N otes
Only use the accessories specified. Do not line the
stainless steel recess (e.g. with aluminum foil).
The burner and ignition plug must be clean and dry.
Only light the burners if the pan supports and all
burner parts are correctly fitted.
When one burner is ignited, an ignition spark will also
be generated at all the other burners.
Do not touch the ignition plug while the gas appliance
is being lit.
It is important to keep the appliance clean. If the
ignition plugs are dirty, this may cause ignition
problems. Clean the ignition plugs regularly with a
small, non-metallic brush. Take care to prevent the
ignition plugs from suffering any heavy knocks.
When you switch from setting 3 to setting 4 or higher,
the burner will briefly switch to its maximum output.
This is to optimize ignition between the burner rings.
Do not cover the ventilation openings on the rear of
the gas cooktop.
When the gas cooktop is switched on, the electronics
open up the gas supply, which produces a short
sound. This is normal.
In the event of a power failure, the appliance will not
work. The gas supply is shut off.
Operating the appliance
en-us
13

Publicidad

Tabla de contenido
loading

Tabla de contenido