Technical Specifications - Num'axes FUG1032 Manual De Instrucciones

Canifugue
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

− Remove the battery from its housing.
− With a metallic tool (e.g. screwdrivers, scissors), connect the 2 battery contacts for approximately 2 seconds.
− Put the battery back in place making sure to follow polarity indicated in the housing (one beep sound is emitted indicating
the battery is in correct position).
− Carry out a check as described in the § How to check that your pet fencing system is functioning properly.
If the problem persists, contact your distributor or check out on www.numaxes.com.
You can also contact NUM'AXES at +33.2.38.69.96.27. or by Email export@numaxes.com.
Depending on the extent of the malfunction, you may have to return your product for service and repair.
For all repairs please supply the following:
− the complete product
− the proof of purchase (invoice or sales receipt)
If you omit one of these items, the after sales service will have to invoice you for any repair costs incurred.

Technical specifications

Power
Tightness
Temperature limitations
Dimensions
Weight
Antenna wire
The device is to be used only with the power source provided by NUM'AXES.
Restricted to indoor use only.
The device is also designed for IT schema with tension between phases of 230 V.
guide canifugue - FUG1032 indice B.indd 32
Transmitter
220 V AC
Charger: input 230 V, 50 Hz, 16 mA/output 15 Vdc, 150 mA
Shower proof
Between – 20°C and + 40°C
117 mm x 110 mm x 28 mm
143 g
0.52 mm² (100 m supplied with the kit) or 1.5 mm²
Wire section recommended depending on the length of the system:
− for less than 400 m of antenna wire: 0.52 mm²
− from 400 to 800 m of antenna wire: 1.5 mm²
32
28/06/2018 14:40

Publicidad

Tabla de contenido
loading

Tabla de contenido