Removing The Header And Lightbox Assys - NAMCO Grand Prix 2 Manual Del Operador

5-1

Removing the Header and Lightbox Assys

The fitting position of the Header Assembly is high, and it is important that
a means of reaching the height safely, without stretching, is available. (e.g.
Steps, Step Stool etc.)
1. Remove 4off whizznuts (M5) and remove the Header Assy
2. Open the upper rear door and disconnect the lightbox connector.
3. Remove 2off whizz nuts (M5) and remove the Lightbox Assy.
4. Reassemble in reverse order.
Whizz nut
(M5)
Whizz nut
(M5)
Lightbox assy
Header Assy
Whizz nut
(M5)
Whizz nut
(M5)
Connector
Upper Rear Door
37