Coin Selector (L), (R) Assemblies; Removing The Coin Selector (L), (R) Assys - NAMCO PAC-MAN BALL Manual Del Usuario

7-7

Coin Selector (L), (R) Assemblies

7-7-1

Removing the Coin Selector (L), (R) Assys

The following describes the procedures for removing and re-installing the Coin
Selector (R) Assy. Follow the same procedures for the removal of Coin Selector
(L).
1. Remove the Underpanel.
2. Disconnect the connector and Earth connector, remove 2off pozi head
screws (M4x6), and remove the Coin Selector (R) Assy.
3. Re-assemble in reverse order.
•
When re-assembling, ensure that the harness near the connector does
not block the coin passage or contact the inside of the Coin Divider
(L), (R) Assy.
Coin Selector (R) Assy
Connector
Ground terminal
[Correct assembly]
(see7-6 page 118)
Cap screws (M) (M4 x 6)
[Improper assembly]
Harness
Page 119
Coin Selector (R) Assy
Coin passage