Gram S3 Serie Manual De Utilización página 37

In the weighting format, it is numbered from #00001" value to #99999#.
To set it to zero, press
Important: Data output to print is compatible with PR-3 de GRAM. If you use
another type of printer, GRAM cannot guarantee its appropriate working.
Data output RS-232C for PC or POS
This scale has a data output compatible with RS-232C and can communicate
with devices that use different protocols. To configure it, follow the following
procedure:
When the balance is in weighing mode, press the
display the message "PLUPro". Press the
shows "Uart".
Press four times
value. Select the value corresponding to the desired protocol in accordance
with the following information:
Protocol 0 -
Protocol 1 -
Protocol 2 -
Protocol 3 -
By pressing the
press to confirm.
To exit, press the
in weighing mode.
until the display shows "Adr" followed by a numeric
Without data output
Continuous output for remote display RD3.
Output on request ($)
Continuous output (for PC or compatible)
and , you can choose the desired option, and after
and the balance will return to normal mode.
. The screen will
several times, until the screen
37