Step 2: Turning The Power On, And Setting The Date And Time - Sony HANDYCAM DCR-SR68 Guía De Operaciónes

Step 2: Turning the power on, and setting the
date and time
1
Open the LCD screen of your camcorder.
Your camcorder turns on.
To turn on your camcorder when the LCD screen is open, press POWER.

2
Select the desired geographical area with
Touch the button on
the LCD screen.
To set the date and time again, touch

(under
/ until the item appears.
3
Set [DST SET] or [SUMMERTIME], date and time, then touch
The clock starts.
If you set [DST SET] or [SUMMERTIME] to [ON], the clock advances 1 hour.

US
1
POWER button
[GENERAL SET] category)  [CLOCK SET]. When an item is not on the screen, touch
MODE lamp
/ , then touch [NEXT].
(MENU)  [Show others]  [CLOCK/
LANG]
.