Paslode F350-21 Manual De Operación
  1. Manuales
  2. Marcas
  3. Paslode Manuales
  4. Pistolas de Clavos
  5. F350-21
  6. Manual de operación
Paslode F350-21 Manual De Operación

Paslode F350-21 Manual De Operación

Ocultar thumbs
Tabla de contenido

Publicidad

Enlaces rápidos

Descargar este manual
P
IMPORTANT!
DO NOT DESTROY
It is the customers responsibility to have all
operators and service personnel read and
understand this manual.
PRINTED IN U.S.A.
© 2015, Illinois Tool Works Inc.
514669-1
03/15
OPERATING MANUAL AND
SCHEMATIC
1
MODEL F350-21º
Part No. 514000
21° Round Head
Framing Nailer

Publicidad

Tabla de contenido
loading

Manuales relacionados para Paslode F350-21

Resumen de contenidos para Paslode F350-21

  • Página 1 MODEL F350-21º Part No. 514000 21° Round Head Framing Nailer IMPORTANT! OPERATING MANUAL AND DO NOT DESTROY SCHEMATIC It is the customers responsibility to have all operators and service personnel read and understand this manual. PRINTED IN U.S.A. © 2015, Illinois Tool Works Inc.

  • Página 2: Tabla De Contenido

    INTRODUCTION The PASLODE F350-21 ° framing nailer is a quality-built tool designed for use in residential ® framing applications. This tool will deliver efficient, dependable performance when used according to the manufactures guidelines. Please study this manual including the safety instructions to fully understand the operation of this tool.

  • Página 3: Tool And Fastener Specifications

    TOOL AND FASTENER SPECIFICATIONS TOOL SPECIFICATIONS F350-21° (Part# 514000) MODEL NO. HEIGHT 13” 5" WIDTH LENGTH 21" WEIGHT 8 lbs. 1oz. OPERATING PRESSURE 80 to 120 p.s.i. (5.5 to 8.3 bars) FASTENER SPECIFICATIONS NAIL LENGTH 2" -3-1/2" SHANK DIAMETER .113 - .148 TOOL AIR FITTINGS This tool uses a 3/8”...

  • Página 4: Safety Instructions

    WARNING Failure to follow any of the above instructions could result in severe personal injury to tool user and bystanders or cause damage to tool and property. Contact your local Paslode Representative for presentation of Paslodeʼs Safety Awareness Program...

  • Página 5: Tool Installation And Operation

    A small tray under the benchtop can hold DIRECTION the fastener supply and the tool when not in use. WORK 6. If this tool does not work when it is first connect- CONTACT ELEMENT ed, do not try to make repairs. Call your Paslode representative immediately.
  • Página 6 TOOL OPERATION - continued Sequential Operation The sequential operating kit prevents succesive or "bounce" driving. Loading of Nails Step 1 - Grasp the handle firmly. Depress the work contacting element and hold it against the ■ work surface before pulling the trigger. Step 2 - Insert one or two strips of nails into the rear of the magazine.

  • Página 7: Air Systems

    Filter/Regulator/Lubricator Units Filter/regulator/lubricator units that can supply All pipes supplying air have a large enough enough air and protection for Paslode tools must inside diameter to ensure adequate air supply. meet the following specifications: The main supply pipe slopes down, away from Minimum 3/8 inch NPT port size .
  • Página 8 4 scfm, a compressor of at least 5 hp is required. especially in winter. • Lubricator operation is checked regularly and ensure it has an adequate supply of lubricant. (Paslode Part No. 403720) • Only regulated air is being used and that each...

  • Página 9: Features And Benefits

    350-21° FEATURES & BENEFITS Powerful Motor Tool-Less Depth of Consistently drives Drive Compact into all engineered Provides precise control lumber. Design of nail depth without adjusting Able to get into the compressor. tight spots (on other side) Metal Exhaust Cap For maximum durability.

  • Página 10: Exploded View And Spare Parts List

    PARTS LEGEND F350-21° , 514000 502004 Air Deflector 502049 Detent Ball 502062 Air Deflector Gasket 502061 Detent Spring 501299 S.H.C.S. 1/4-20 x 1” 404361 Roll Pin 1/8” x 1/2” 502003 Top Cap 502050 Detent Body 502013 Top Cap Gasket 502055 W.C.E.
  • Página 11 -21° 514000 ❂ ❂ ❂ ❂ ❂ ❂ Note: Install check band with thick side down. ❂ ❂ ❂ ❂ ❂Torque Values IN/LBS...

  • Página 12: Maintenance

    Ensure that the required safety information on the tool ❑ is legible. Reduce the regulated air pressure to 30 psi. ❑ Use only Paslode approved fasteners in the tool, and ❑ Remove all fasteners from the tool. ❑ ensure that they are correct for the application.
  • Página 13 Keep lubricator filled. Keep tool lubricated. Fill with Paslode pneumatic tool lubricant. Part No. 403720. Clean filter element-then blow Prevent clogging of filter with Wash with soap and water or air through filter in direction dirt.

  • Página 14: Troubleshooting

    Tools skips during operation - no fasteners are debris. driven from time to time. Make sure correct fasteners are being used. Use fasteners that meet Paslode specifications only. ® Increase air flow to tool -- use larger air lines (3/8 ID minimum).

  • Página 15: Warranty

    ONE-YEAR LIMITED WARRANTY Paslode's sole liability hereunder will be to replace any part or accessory which proves to be defective within the specific A one-year warranty will apply to all parts, except time period.

  • Página 16: Accessories

    Part No. 401382 Sequential Only Trigger Part No. 502253 No Mar Work Contact Part No. 502234 For additional information on Paslode products, visit our website at ® www.paslode.com. For technical support call 1-800-222-6990. To purchase parts and accessories, visit www.itwconstructionparts.com.

Este manual también es adecuado para:

514000

Tabla de contenido