Tabla de contenido
Publicidad
6-3-3-1 Switch and Paddle Test
1.
Select "Switch Test" on the I/O menu screen and press enter to test
the switches. The following screen is displayed.
2.
The display shows the current state of the switches.
3.
Press the Up Select switch and the Enter switch together to EXIT and
return to the I/O menu screen
TEST
COIN
SERVICE
START
UP SELECT
DOWN SELECT
ENTER
HORIZONTAL
VERTICAL
THRUST
(a) - (g)
Displays current condition of each switch. 'TEST' is always ON. All
other switches OFF will change to ON each time the switch is
operated.
(h)
When the paddles are pushed backwards or forwards, the number
will change. 'OK' will be displayed just before each paddle is pushed
fully forward.
(i)
When the paddles are pushed up or down, the number will change.
'OK' will be displayed just before each paddle is pushed fully up.
(j)
This test checks the rowing operation of the paddle. The indication
changes in a + (plus) value when you paddle forwards, and changes
in a - (minus) value when you paddle backwards.
SWITCH & PADDLE
: ON
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
: FFFF ––
: FFFF ––
: – –––– –––– +
UP + ENTER
:
EXIT
Page 51
.............................................. (a)
.............................................. (b)
.............................................. (c)
.............................................. (d)
.............................................. (e)
.............................................. (f)
.............................................. (g)
..................... (h)
_______ ...................... (i)
...................... (j)
Publicidad
Tabla de contenido
