Replacing The Kicker Guides - NAMCO WORLD KICKS Manual De Instrucciones

8-4

Replacing the Kicker Guides

1. Remove the Kicker Assembly.
2. Remove 2off pozi head screws (M4x8) and remove the Kicker Mechanism Cover.
3. Remove 2off hex head screws (M8x20), with flat and spring washers, 4off hex
head screws (M8x85), with flat and spring washers, and remove the Mechanical
Stop Bracket and upper Guide.
4. Remove the Kicker Arm while pushing the spring in the direction of the arrow.
Pozi head screw
(M4x8)
Kicker mechanism cover
Kicker arm
Hex head screw
(M8x20)
(see 8-2 page 60)
Mechanical stop bracket
Page 63
Hex head screw
(M8x85)
Guide
kicker assy