Replacing The Monitor - NAMCO WORLD KICKS Manual De Instrucciones

8-10

Replacing the Monitor

This monitor is heavy, at least three (3) people are required to remove the
monitor. Two (2) people should be supporting the monitor, one (1) supporting
the front and one (1) supporting the back, while the third person removes the
fixing nuts. Failure to follow these safety precautions could result in injury due
to trapped fingers, or damage to the monitor.
1. Seperate the Kicker Cabinet from the Monitor Cabinet.
2. Loosen only, the lower 2off socket button head screws (M6x20), remove the
upper 2off socket button head screws (M6x20) and remove the Monitor Access
Door.
3. Disconnect the monitor connectors.
4. Remove the Monitor Glass.
Connectors
Socket button
head screw
(M6x20)
Monitor access
door
(see 8-9 page 71)
Page 72
(see 5-2 page 39)
Socket button
head screw
(M6x20)
Monitor cabinet