Gun Assembly; Replacing The Gun Assembly - NAMCO TIME CRISIS 2 Dlxe Manual Del Operador

7-6 Gun Assembly

7-6-1

Replacing the Gun Assembly

1. Remove 8off security screws (M8x20) and remove the gun pod
complete with the gun.
2. Disconnect the connectors and remove the 2off whizztite nuts (M6).
3. Remove the gun assembly from the gun pod.
Note: When replacing the gun assembly ensure that the earth wires are
located on to the studs before fitting and tightening the whizztite
nuts (M6)
Page 63