Tabla de contenido
Publicidad
6-3 Test Mode
1.
Open the coin door and slide the test switch "ON". The "Menu Screen" will
be displayed on the monitor.
2.
Select the test required by using the select up/down switch. The colour of
the selected test will change.
3.
Activate the test by pressing the Enter switch. Select "EXIT" in each test
to return to the "Menu Screen".
4.
After testing is completed, slide the test switch to the "OFF" position to
return to normal game mode.
The Test Switch must always be in the "OFF" position for normal game mode.
COIN OPTIONS
GAME OPTIONS
I/O TEST
MONITOR TEST
SOUND TEST
ADS DATA
OTHERS
LINK MALFUNCTION
GAME DIFFICULTY L/R:NOT THE SAME ............
The internal battery's dead ......................
SELECT SW : CHOOSE
(a) Error message related to link play
•
A message appears if the link play is defective. The number displayed
represents the type of error
•
when 1 or 2 is displayed either the main PCB or memory PCB may be
defective. Contact your distributor.
•
If 3 is displayed, the software version on the left game PCB is different
from that on the right game PCB. Contact your distributor.
(b) Error message related to difficulty settings
•
A message appears if the difficulty settings of the left and right game
PCBs are different. Enter GAME OPTIONS inthe test mode and set
both PCBs the same.
(c)
Low battery display
•
A message appears if the Main PCB battery is faulty. Contact your
distributor.
MENU
............................ Used to set the price of play
............................ Used to set the game options
............................ Used for testing switches & Gun
............................ Used for setting the monitor
............................ Used for setting the volume
............................ Used to view bookkeeping
............................ Used for testing the PCB
1
2
ENTER SW : ENTER
Page 44
}
3 ..............
(a)
(b)
(c)
Do not appear when OK
Publicidad
Tabla de contenido
