Greasing The Pedal Assy Plunger - NAMCO TIME CRISIS 2 Dlxe Manual Del Operador

7-4 Greasing the Pedal Assy Plunger

1. Remove 4off security screw (M5x12) and remove the switch cover plate.
2. Remove 2off whizztite nuts (M4) and remove the switch.
3. Remove 4off whizztite nuts (M4) and remove the plaunger assembly.
Note: The plunger is spring loaded. Keep the plunger pressed in when
removing the assy and release the plunger slowly.
4. Remove any old grease and dirt from the plunger and pedal plate.
5. Grease both the plate and spherical portion of the plunger.
6. Reassemble in reverse order.
Page 61