Gun Initialize - NAMCO TIME CRISIS 2 Dlxe Manual Del Operador

6-3-3-2 Gun Initialize

1. Select 'GUN INITIALIZE' from the I/O Test Screen. The following
screen is displayed:-
GUN INITIALIZE
GUN INITIALIZE
EXIT
SELECT SW : CHOOSE
2. Use the Up/Down switch to select 'GUN INITIALIZE (PROJECTOR)',
and press the Enter switch. The following screen is displayed.
PUSH ENTER SW : ADJUST GUN SIGHT
UP SELECT SW + ENTER SW : EXIT
3. This screen allows the gun accuracy to be checked. Shoot the gun at
the screen. The screen will display the position of the bullet. If the
position is not where the gun was aimed press the 'Enter sw' or press
on the pedal. The following screen will be dispalyed.
GUN INITIALIZE
ENTER SW : ENTER
GUN INITIALIZE (PROJECTOR)
SHOOT AT SCREEN
TO CHECK GUN ACCURACY
Page 49
(CRT)
(PROJECTOR)
...................... (a)
...................... (b)