If needed, an exploded view of the tool can be ordered.
Please state the Article No. as well as the machine type
printed on the label and order the drawing at your local
service agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
CAUTION! WARNING! DANGER!
Always disconnect the plug from the socket
before carrying out any work on the machine.
Please read the instructions carefully before
starting the machine.
Wear ear protectors.
Accessory - Not included in standard
equipment, available as an accessory.
Do not dispose of electric tools together with
household waste material.
Electric tools and electronic equipment that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
Class II tool, tool in which protection against
electric shock does not rely on basic
insulation only, but in which additional safety
precautions, such as double insulation or
reinforced insulation, are provided.
There being no provision for protective
earthing or reliance upon installation
conditions.
European Conformity Mark
Regulatory Compliance Mark (RCM). Product
meets applicable regulatory requirements.
National mark of conformity Ukraine
EurAsian Conformity Mark.
24
ENGLISH
TECHNISCHE DATEN
Produktionsnummer ................................................................
..............................................................................................
Nennleistungsaufnahme ..........................................................
Abgabeleistung ........................................................................
Leerlaufdrehzahl ......................................................................
Lastdrehzahl max. ...................................................................
Lastschlagzahl max. ................................................................
Einzelschlagstärke entsprechend EPTA-Procedure 05/2009 .
Bohr-ø in Beton .......................................................................
Tunnelbohrer in Beton, Ziegel und Kalksandstein ...................
Hohlbohrkrone in Beton, Ziegel und Kalksandstein.................
Gewicht nach EPTA-Prozedur 01/2014 ...................................
Geräuschinformationen
Messwerte ermittelt entsprechend EN 60 745.
Der A-bewertete Geräuschpegel des Gerätes beträgt
typischerweise:
Schalldruckpegel (Unsicherheit K=3dB(A)) .............................
Schallleistungspegel (Unsicherheit K=3dB(A)) ........................
Gehörschutz tragen!
Vibrationsinformationen
Schwingungsgesamtwerte (Vektorsumme dreier Richtungen)
ermittelt entsprechend EN 60745:
Hammerbohren in Beton:
Schwingungsemissionswert a
.............................................
h
Unsicherheit K= ....................................................................
Meißeln
Schwingungsemissionswert a
.............................................
h
Unsicherheit K= ....................................................................
TECHNISCHE DATEN
Produktionsnummer ................................................................
..............................................................................................
..............................................................................................
..............................................................................................
Nennleistungsaufnahme ..........................................................
Abgabeleistung ........................................................................
Lastschlagzahl max. ................................................................
Einzelschlagstärke entsprechend EPTA-Procedure 05/2009 .
Gewicht nach EPTA-Prozedur 01/2014 ...................................
Geräuschinformationen
Der A-bewertete Schalldruckpegel des Gerätes beträgt
typischerweise .........................................................................
Messwert ermittelt entsprechend 2005/88/EG am Ohr des
Anwenders. 2005/88/EG: Konformitätsbewertungsverfahren
nach Anhang VI.
Benannte Stelle:
VDE Prüf- und Zertifi zierungsinstitut, Merianstr. 28, 63069
Off enbach, Germany
Gemessener Schallleistungspegel ..........................................
Garantierter Schallleistungspegel............................................
Gehörschutz tragen!
Vibrationsinformationen
Schwingungsgesamtwerte (Vektorsumme dreier Richtungen)
ermittelt entsprechend EN 60745:
Meißeln
Schwingungsemissionswert a
.............................................
h
Unsicherheit K= ....................................................................
K950 S
..................... 4171 61 02...
..................... 4171 63 02...
...000001-999999
.......................1700 W
.........................850 W
..................125-250 min
-1
..................125-250 min
-1
................975-1950 min
-1
...........................20 J
......................28-50 mm
......................50-80 mm
....................45-150 mm
........................ 11,8 kg
.........................100 dB (A)
......................... 111 dB (A)
........................12,5 m/s
2
.............................2 m/s
2
........................... 11 m/s
2
.............................2 m/s
2
K900 K
K900 S
..................... 4171 45 02... ............. 4171 67 02...
..................... 4171 50 02... ............. 4171 71 02...
..................... 4171 55 02... ............. 4171 73 02...
..................... 4171 53 02...
...000001-999999
...000001-999999
.......................1600 W .........................1600 W
.........................800 W ...........................800 W
................975-1950 min
..............975-1950 min
-1
-1
...........................20 J ...............................20 J
........................ 11,0 kg .......................... 11,0 kg
...........................94 dB (A) ......................94 dB (A)
.........................102 dB (A) ....................102 dB (A)
.........................105 dB (A) ....................105 dB (A)
........................... 11 m/s
2
.......................... 11 m/s
2
.............................2 m/s
2
............................2 m/s
2
DEUTSCH
25