Automatic Clean Lock; Automatic Door Opening; Switching The Water Filter Counter On And Off - Thermador T36IT901NP Manual De Uso Y Cuidado

en-us Operating the appliance

Automatic clean lock

You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Press ) button to move to the menu
4.
item Automatic clean lock.
To change the setting, press : button.
5.

Automatic door opening

The automatic door opening function supports you in
opening the door.
As soon as you activate this function, automatic door
opening moves out and supports you in opening the
door.
9
CAUTION
Repeatedly closing the door too early will cause
automatic door opening to fail or wear out.
Do not close the door as long as automatic
door opening is still moved out.
If you have however closed the door, leave it
closed for 5 minutes. Automatic door opening
will re-adjust itself.
Open menu item Auto door opening of refrigerator
compartment:
Press " button to open the Settings menu.
1.
Press ( button to move to the Appliance settings
2.
menu.
Press 8 button to open the menu.
3.
Press ) button to move the menu item Auto door
4.
.
opening
j
To change the setting, press : button.
5.
Open menu item Auto door opening of freezer
compartment:
Press " button to open the Settings menu.
1.
Press ( button to move to the Appliance settings
2.
menu.
Press 8 button to open the menu.
3.
Press ) button to move the menu item Auto door
4.
.
opening
k
To change the setting, press : button.
5.
16
Switching on Push-to-open system
In an installation situation without handles you can
select the Push-to-open system. Your appliance will
then open a crack if you press lightly on the door.
Note: Please note that automatic door opening is
disabled if Sabbath mode is activated.
Open menu item Auto door opening of
1.
refrigerator compartment or freezer compartment.
Select menu item Push-to-open system.
2.
Press 8 button to open the menu item.
3.
Select Opening force.Here you can select the
4.
level of force required to activate automatic door
opening.
Select Opening duration.Here you can select
5.
how long the door should remain open a crack
before it closes again automatically.
If the door only remains open a crack, the
Note:
appliance checks once a second whether the door
is still ajar.After the selected opening duration
elapses, the appliance will close the door
automatically.
Switching on Pull-to-open system
In an installation situation with handles you can
select the Pull-to-open system. Your appliance will
support you in opening the door as soon as you pull
on the handle.
Open menu item Auto door opening of
1.
refrigerator compartment or freezer compartment.
Select menu item Pull-to-open system.
2.
Press 8 button to open the menu item.
3.
Select menu item Opening force. Here you can
4.
select the level of force required to activate
automatic door opening.
Switching off automatic door opening
Open menu item Auto door opening.
1.
Select menu item Off.
2.
Switching the water filter counter on and
off
If you have replaced the water filter with a particle
filter, switch the water filter counter off. It is not
needed in this case as the particle filter does not
have to be replaced.
Press " button to open the Settings menu.
1.
Scroll to the left to the Appliance settings menu.
2.
Press 8 button.
3.
Press > button to move to the menu item Water
4.
filter counter.
To change the setting, press : button.
5.