Hitachi SV 12SG Manual De Instrucciones página 11

Ocultar thumbs Ver también para SV 12SG:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6. Installing the sanding paper
(1) Peel off the paper on the backside of the
quick stick sanding paper.
Since adhesive agent is applied on the paper
on the backside of the quick stick sanding
paper, make sure that it is not exposed to
dust or other particles. Fig. 2.
(2) To attach the quick stick sanding paper,
match its holes to the holes in the quick stick
rubber pad.
NOTE:
Wipe off any dust or oil on the pad before
attaching the sanding paper to it.
(3) Surely attach the quick stick sanding paper
by strongly and evenly pressing with your
palm. (Fig. 4)
NOTE:
If you reattach the quick stick sanding paper
several times, its adhesive strength will
become lowered. Please try to attach it only
once.
7. Attaching and removing the dust bag
(1) Attaching the dust bag
As shown in Fig. 5, hold the dust gate and
push it in the direction of arrow A to attach
it to the dust outlet.
(2) Removing the dust bag
As shown in Fig. 5, hold the dust gate and
pull it in the direction of arrow B to remove
it from the dust outlet.
Paper on backside
Fig. 2
Quick stick
sanding paper
Fig. 3
Press strongly
Fig. 4
A
B
Dust outlet
Fig. 5
English
Quick stick
rubber pad
Dust bag
Dust gate
11

Publicidad

Tabla de contenido
loading

Tabla de contenido