Operating Sequence - Zanussi ZWG3107 Manual De Uso

Operating sequence

Before washing your first load of laundry, we recommend that you run a cotton cycle at 60° C, with the machine
empty, in order to remove any manufacturing residue from the drum and tub. Pour half of the normal amount of
detergent into the main wash compartment and start up the machine.
1. Place the laundry in the drum
Open the door by pulling the handle outwards. Place
the laundry in the drum, one item at a time, shaking
them out as much as possible. Close the door.
2. Measure the detergent
Pull out the dispenser drawer until it stops.
Measure the required amount of detergent, pour it
into the main wash compartment
compartment marked
has been chosen).
3. Measure the fabric softener
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
"MAX" mark in the drawer).
Close the drawer gently.
and into the
(if PRE-WASH option
4. Select the required programme
Turn the programme selector to the required
programme.
5. Select the spin speed or
rinse hold options
6. Select the required option push
button/s
40