Publicidad
10
If needed, switch the levers.
Correct
No change necessary.
Incorrect
a.
b.
Chassis
c.
Note location
of lever catch.
d.
Lever catch is now
on opposite side.
e.
For the exterior lever, insert the pin
wrench into the hole in the lever.
Push in and hold.
Pull the lever off the chassis.
Repeat steps a and b to remove the
Alarm Interior lever.
Rotate the chassis so the lever catch is
on the opposite side.
Use the lever from the exterior to
reassemble the Alarm Interior.
Put the lever from the Alarm Interior on
the exterior.
Publicidad
