Use; Cleaning And Maintenance - Imetec L8204 Instrucciones De Uso

Styling nozzle (5)
Use the styling nozzle to direct the air jet as you wish.
IMPORTANT: use only the original accessories of the
appliance.
EN
The appliance has various control and function buttons, depending
on the model. Refer to figure [A] in the illustrative guide of the
instructions for use.
The combined air flow/temperature button (3) sets the relative
functions at the following levels:
0 = OFF
1 = low air flow and low temperature
2 = high air flow and medium temperature

CLEANING AND MAINTENANCE

Cleaning the appliance and accessories
Clean the appliance and the accessories (nozzle 5) with a
damp cloth, when necessary. DO NOT use solvents or other
aggressive or abrasive detergents. Otherwise, the surface could
be damaged.
Check the intake filter (7) of the appliance regularly and remove
all hair and dust.
Note: the more dust is present in the place where the hair dryer
is used, the more often the filter must be cleaned.
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or other
vessels containing water. Never place
the appliance into water.
WARNING! DO NOT spray hairspray
while the appliance is switched on.
There is a risk of fire.
WARNING! Always disconnect the
appliance from the mains supply
before cleaning
maintenance.

USE

or
12
performing