Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ELECTRICAL

W A R N I N G
The double insulated system is intended to protect the user from shock resulting from a break in the
product's internal insulation. Observe all normal safety precautions to avoid electrical shock.
dOUBLE INSULATEd
Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual
three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor
components with protecting insulation. Double insulated products do not need to be grounded.
NOTE: Servicing of a product with double insulation requires extreme care and knowledge of the
system and should be performed only by a qualified service technician. For service, we suggest you
return the product to your nearest authorized service center for repair. Always use identical replacement
parts when servicing.
ELECTRICAL CONNECTION
This product has a precision-built electric motor. It should be connected to a power supply that is 120
volts, 60 Hz, AC only (normal household current). Do not operate this product on direct current (DC). A
substantial voltage drop will cause a loss of power and the motor will overheat. If the product does not
operate when plugged into an outlet, double check the power supply.
Drip Loop
Power Cord
Fig. 1
GROUNd FAULT CIRCUIT INTERRUPTER
This unit is equipped with a Ground Fault Circuit Interrupter (GFCI), which guards against the hazards
of ground fault currents. An example of ground fault current is the current that would flow through a
person who is using an appliance with faulty insulation and, at the same time, is in contact with an
electrical ground such as a plumbing fixture, wet floor, or earth. GFCI plugs do not protect against short
circuits, overloads, or shocks.
EN - 9

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido