Nostalgia Electrics CCP399 Instrucciones Y Recetas página 9

Assembly of Base Support
1. Attach Push Handle (E) from inside
Storage Compartment (C) using
supplied #6 Screws and #7 Nuts.
2. Insert Cross Bar (K) into the square inserts on the
inside of Base Support (I) and secure from below
with two #1 Screws. Insert the Leg Assembly (L) over
the protruding ends of the Base Support (I) and
fasten from the inside of Base Support (I) using four
#3 Bolts, four #4 Flat Washers, and four #5 Nut Caps.
3. Secure Bottom Plate (J) to Base Support (I) using four #1 Bolts.
4. Assemble Base Support (I) into the bottom of the Storage
Compartment (C) and secure with four #2 Bolts.
7