Tripp-Lite SmartOnline 8kVA Manual Del Propietário página 20

Operation (continued)
UPS Alarm Log
Read From Memory: records the last 5 fault events from the EEPROM. See the Fail Event List below:
Fail Event List
DC BUS FAIL
SHORT CIRCUIT
INVERTER FAIL
OVER TEMPERATURE
OUTPUT SCR FAIL
OVERLOAD
FAN FAIL
From the SETUP MENU screen, scroll DOWNi until you reach the UPS ALARM LOG screen. Press ON to enter the READ FROM MEMORY
screen and ON again. Here, you can scroll DOWNi or UPh to read the last 5 fault events. Press ON to exit this menu.
Erase All: used to clear the Fault Event Log. From the STARTUP MENU, scroll DOWNi until you reach the UPS ALARM LOG screen. From
here, press ON to reach the READ FROM MEMORY screen and press DOWNi for the ERASE ALL screen. From here you can scroll DOWNi
or UPh between Yes and No. Press ON to save your selection. You will now be presented with a SURE? screen. Press ON to save or scroll for more
options.
201102160 93-2897.indb 20
UPS ALARM LOG READ FROM MEMORY
ENT DOWN UP ENT
To ENTER

CHARGER BATTERY FAIL
BYPASS SCR SHORT FAIL
INPUT SCR SHORT FAIL
DERATE SHUTDOWN
ENERGY SAVING
OUTPUT HAS VOLTAGE
INPUT FUSE FAIL
UPS ALARM LOG READ FROM MEMORY
ENT DOWN UP ENT
To ENTER

ENT
1 65535 HH:MM:SS
DOWN UP NO HISTORY
 
2 65535 HH:MM:SS
NO HISTORY

3 65535 HH:MM:SS
NO HISTORY

4 65535 HH:MM:SS
NO HISTORY

5 65535 HH:MM:SS
NO HISTORY
OUTPUT FUSE FAIL
DC BUS OVP FAIL
INPUT HVP RELAY SHORT FAIL
INPUT HVP RELAY OPEN FAIL
NTC OPEN FAIL
LOW TEMP FAIL
DOWN UP

ERASE ALL
DOWN UP
NO HISTORY


NO HISTORY
20
NO
YES
3/30/2011 9:30:52 AM