Tripp-Lite SmartPro 3U Manual De Operación página 8

Basic Operation
Other UPS Features (Rear Panel)
15 amp NEMA 5-15R
20 amp NEMA 5-20R
30 amp NEMA L6-30R
AC Receptacles
Your UPS features 15-amp, 20-amp and 30-amp AC outlets. These output receptacles provide
your connected equipment with AC line power during normal operation and battery power
during blackouts and brownouts. The UPS protects equipment connected to these receptacles
against damaging surges and line noise. If you have a serial or USB connection to your
UPS, you can remotely reboot connected equipment by turning the UPS OFF and ON using
Tripp Lite's PowerAlert Software. Selected outlets may be remotely switched OFF and ON
individually using Tripp Lite UPS software without interrupting power to equipment
connected to the other outlets. The UPS also features unswitched outlets, which may not be
individually switched OFF. See software instructions for details.
Smart DB9 Ports
Your UPS features 2 DB9 ports that may be used to connect the UPS to a DB9 port on any
workstation or server. Use with Tripp Lite cabling and PowerAlert Software to monitor and
manage network power and automatically save open files and shut down equipment during
a blackout (see Connection.) The DB9 port labeled "SNMP Config" is also used while
configuring Tripp Lite SNMP Adapters.
Smart USB Ports
Your UPS features 2 USB ports that may be used to connect the UPS to a USB port on any
workstation or server. Use with Tripp Lite cabling and PowerAlert Software to monitor and
manage network power and automatically save open files and shut down equipment during
a blackout (see Connection.)
EPO (Emergency Power Off) Port
Your UPS features a EPO port that may be used to connect the UPS to a contact closure
switch to enable emergency inverter shutdown. (See Connection.)
8