Installation Procedure; Installing The Heat Shield - Thermador Masterpiece Serie Manual Del Usuario

An opening at the top to the rear of the cabinet.
▯
If the minimum clearance of
▯
provided at the rear of the cabinet, you must create an
opening on the underside.

Installation Procedure

CAUTION
9
Sharp edges. Use protective gloves when installing
the cooktop.
Note: The appliance is heavy. It is advisable to install it
with a second person.

Installing the heat shield

CAUTION
9
Sharp edges. Use protective gloves when installing
the plate.
For safety reasons, the heat shield must be properly
installed when closed cabinets are used. This prevents
components from overheating as a result of the
recirculation of hot air from the cooktop.
The heat shield is the same width as the cooktop. For
shipping, it is screwed to the bottom of the burner box.
After unpacking the cooktop, unscrew the heat shield.
/ inch (20 mm) is not
13
16
I n s t a l l a t i o n P r o c e d u r e
If the inside of the cabinet is no wider than
▯
29 / inch (750 mm), make cutouts in the side
1
2
panels.
Note: If the appliance is installed in an island unit or
another installation that is not described here, you must
ensure that the cooktop is sufficiently ventilated.
The heat shield will be able to rotate freely, as shown in
the illustration.
7