Secure The Cooktop To Countertop; Electrical Installation; Electrical Requirements - Thermador Masterpiece Serie Manual Del Usuario

Secure the cooktop to countertop

CAUTION
9
Do not let the glass drop into place. Make sure that
it is supported along a broad area of the edges
when carefully placing the cooktop into the cutout.

Electrical Installation

Electrical requirements

You can find the identification plate with the electrical
specifications on the underside of the appliance. The
junction box must be located within 3 feet of the cooktop
connection. It should be easily accessible for service
purposes.
8
The appliance must be secured from below using the
hold-down brackets provided, so it does not slip.
Note: Protect delicate countertops by placing a wooden
disk underneath.
Rotate the appliance and position it so that the screws
1.
provided are seated loosely in the holes. Move the
hold-down brackets so that the appliance can be
placed in the cutout.
Place the appliance carefully into the cutout.
2.
Insert the clamping screws into the hold-down
3.
brackets and secure the appliance to the countertop.
Tighten screws.
Power supply