Cutout Dimensions For 36" Cooktops; Ventilation - Bosch NIT5068UC Manual De Instalación

Cutout dimensions for 36" cooktops

Models: NIT5668UC, NIT8669SUC, NIT8669UC,
NITP669SUC, NITP669UC

Ventilation

To assure that the appliance works correctly, the cooktop
MUST be sufficiently ventilated.
Since the ventilation in the lower section of the appliance
requires a sufficient supply of fresh air, the cabinet must
be designed accordingly. The following is required for
this:
A minimum clearance between the rear of the cabinet
▯
and the kitchen wall, and between the surface of the
worktop and the upper area of the drawer.
6
An opening at the top to the rear of the cabinet.
▯
If the minimum clearance of
▯
provided at the rear of the cabinet, you must create an
opening on the underside.
If the inside of the cabinet is no wider than
▯
29 / inch (750 mm), make cutouts in the side
1
2
panels.
Note: If the appliance is installed in an island unit or
another installation that is not described here, you must
ensure that the cooktop is sufficiently ventilated.
/ inch (20 mm) is not
13
16