Toyotomi Zibro LC-130 Instrucciones De Uso página 3

GENERAL DIRECTIONS FOR USE
Below you will find the main steps to be taken for using your
heater. For more details, please refer to the MANUAL.
1
Remove all packaging materials (refer to Section A, Fig. A).
2
ill the removable tank
3
Insert the plug into the
4
Ignite the heater using the
5
If re uired, change the temperature using the adjustment keys
(refer to Section E).
6
S itch off the heater by pressing the
• As a fire precaution, the tank must be filled either
been switched off or in another room than the room where the heater is
installed.
• Al ays ensure that the tank is closed properly after filling it at a safe
distance from all sources of heat and open flames (see Section B).
• The first time the heater is ignited it
• Store all fuel containers
dark place.
• uel ages. Use ne
• Only use high uality and
local legislation (TOYOTOMI fuel).
• Before changing brands and/or types of fuel make sure that the mobile
heater first completely empties all of the remaining fuel inside the heater.
(refer to Section B, Fig. C).
all-socket.
key ¹ (refer to Section D).
key ¹.
ill smell like "ne " for a short time.
ith their original caps and seals in a cool and
fuel at the start of every heating season.
ater-free pure paraffin in accordance
hen the heater has
ith
4
3