adapters or extension cords is not recommended; if their use is necessary, they
must conform to existing safety standards and their current capacity (amperes)
must not be less than the maximum of the appliance.
Before each use, check that the equipment is in good condition, that the power
cord is not damaged: if in doubt consult a qualified professional.
The power socket must be easy to reach so the plug can be removed quickly in
case of emergency.
Keep the appliance away from:
heat sources (e.g. open flame, gas stove, etc.)
-
liquid receptacles (e.g. sinks, etc.) to avoid water splashing onto the
-
appliance or it falling in (minimum distance of 2 meters)
fabrics (curtains, etc.) or floating materials that could obstruct the air
-
intake grille; make sure that the front is free of floating materials (dust,
etc.).
The appliance must not be used in dusty environments or in the presence of
floating materials or used in a room where there is a fire risk.
Stand the appliance on a smooth, horizontal surface or table; do not place it on
a inclined surface (the appliance could fall over).
ASSEMBLY
Attention: the fan can be used only when completely and correctly assembled,
that is complete with its base and support and protection grid.
If in doubt, have the appliance checked or assembled by a qualified professional
person. For assembly, refer to figure.
Attention: always unplug the appliance before you assemble.
15/48