Loading The Module - Miele professional A 306 Instrucciones De Manejo

en - Areas of application
26

Loading the module

This injector module has 4 holders for large volume glassware and
can be loaded as follows:
– 4 x 2000 ml tall cylinders,
– 2 x 2000 ml short cylinders, or
– 2 x 1000 ml tall cylinders and 2 x 1000 ml short cylinders..
Place the cylinders over the jets.

The cylinders are held in position by wire supports. The bases of the
cylinders must not touch each other once loaded.
The load must not extend over the edges of the basket.