How To Hang Your Ceiling Fan - Luminance Brands Kathy Ireland Home CF144LGRT00 El Manual Del Propietario

CAUTION
!
To reduce the risk of injury, install the fan so that the
blades are at least 7 ft. (2.1m) above the floor (Figure 6).
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring
must be in accordance with National and Local codes
and the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
! WARNING
The outlet box and joist must be securely mounted and
capable of supporting at least 50 lbs. Use only a U.L.
outlet box listed as "Acceptable for Fan Support of
22.7 kg. (50 lbs.) or less".
WARNING
!
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked "Acceptable
for Fan Support of 22.7 kg. (50 lbs.) or less", and
use screws supplied with outlet box. Most outlet
boxes commonly used for support of light fixtures
are not acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
4.1
Disconnect electrical power to the Branch Circuit at the
Circuit Breaker or Fuse Box before attempting to install
the Ceiling Fan Mounting Plate on the Outlet Box .
AT
LEAST
7'
Figure 6
OUTLET BOX SCREWS (2)
Figure 7
4.2
Pull the Electrical Supply Black, White and Ground
Wires through the center opening of the Ceiling
Mounting Plate before securing the plate to the Outlet
Box (Figure 7) .
Position the Ceiling Mounting Plate onto the Outlet Box
and secure using the two Outlet Box Screws, supplied
with Outlet Box (Figure 7) .
Please contact 1-800-777-4440 for further assistance
7
CEILING
FLOOR
OUTLET BOX
CEILING MOUNTING
PLATE
CEILING MOUNTING
PLATE HOOK
luminancebrands.com
U.L. Model No.: CF144L & CF152L