Attaching The Cover Strips - Bosch B18 Serie Instrucciones De Instalación

3
For / " / 19 mm thick furniture doors:
4
Slide cover frame onto the ice-water dispenser and
̈
press in until the frame is flush with the door surface.
1
For 1 / " / 38 mm thick furniture doors:
2
Press extension frame onto the cover frame.
̈
Slide cover frame onto the ice-water dispenser and
̈
press in until the frame is flush with the door surface.
Loosen screws on the 4 clamps (1.).
̈
Insert flat screwdriver into one of the 4 slots and push
̈
the blocks sideways until the ice-water dispenser has
the same distance from the furniture door (2.).
Retighten the screws on the clamps (3.).
̈
Insert covers.
̈
Re-insert the pitcher holder.
̈

28. Attaching the cover strips

(for wine storage cupboard only)
If the frame width is narrow, the cover strip side piece may
have to be shortened. To determine the required length of
the side piece, test pieces are enclosed with the cover strip.
39