Truma ZUE Instrucciones De Uso página 15

Note for Trumatic E heating
systems: If additional acces-
sory items are being used (e.g.
remote sensor), the MSD multi-
pin socket is to be used (part no.
39010-78200).
7. Screw the cover of the elec-
tronic control unit back on again.
Light connection
If it is intended for the clock to
be illuminated (additional current
consumption at 12 V; 145 mA),
then, with 12 V systems, 12 V is
to be applied to the yellow cable
of the clock plug.
With 24 V systems, the 12 V
lamp fitted must be replaced
by a 24 V lamp (Truma part no.
39010-87400 or available from
specialist dealers).
Extend the yellow cable with a
cable measuring 0.75 mm² and
(if necessary, via a switch) run it
to the central electrical system
(or the vehicle electrical system,
terminal 58 „Lighting On").
Fuse capacity is
max. 5 A for the con-
nection cable for the lighting.
15