Getting To Know Your Appliance; The Control Panel - NEFF T D.3 Serie Instrucciones De Uso

Unsuitable pans
Never use diffuser hobs or pans made from:
common thin steel
■
glass
■
earthenware
■
copper
■
aluminium
■
Characteristics of the pan base
The characteristics of the pan base may affect the uniformity of
the cooking results. Pans made from materials which help
diffuse heat, such as stainless steel sandwich pans, distribute
heat uniformly, saving time and energy.
Absence of pan or unsuitable size
If no pan is placed on the selected hotplate, or if it is made of
unsuitable material or is not the correct size, the power level
displayed on the hotplate indicator will flash. Place a suitable
pan on the hotplate to stop the flashing. If this takes more than
90 seconds, the hotplate will switch off automatically.

Getting to know your appliance

On page 2, you will find information on the dimensions and
power of the hotplates.

The control panel

Control panels
Main switch
#
Select the hotplate
$
Select settings
/
A @
Cleaning lock function
"
Childproof lock
‚
Flexible zone
ï
Powerboost Function
˜
"Keep warm" function
–
Time program function
3
Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.
Pan detection
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
Indicators
Functionality
‹
Power levels
‚ - Š
Powerboost Function
˜
Residual heat
/
• œ
Time program function
‹‹
Childproof lock
‚
"Keep warm" function
–
Automatic shut-off
x
Time program function
S
Flexible zone
ï
Control panels
Pressing a symbol activates its corresponding function.
Note: Always keep the control surfaces dry. Moisture can affect
proper working.
21