Electrical Connection - Sharp R-861 Manual De Instrucciones

INSTALLATION
high humidity are generated, (for example, near or above a
conventional oven) or near combustible materials (for ex-
ample, curtains).
Do not block or obstruct air vent openings.
Do not place objects on top of the oven.

ELECTRICAL CONNECTION

• Do not allow water to come into contact with the power
supply cord or plug.
• Insert the plug properly into the socket.
• Do not connect other appliances to the same socket us-
ing an adaptor plug.
• If the power supply cord is damaged, it must be replaced
by a Sharp approved service facility or a similarly qualified
person to avoid a hazard.
• When removing the plug from the socket always grip the
plug, never the cord as this may damage the power sup-
ply cord and the connections inside the plug.
• If the plug fitted to your oven is a rewireable type and
in the event of the socket outlet in your home not be-
ing compatible with the plug supplied, remove the plug
properly (do not cut off ).
• If the plug fitted to your oven is a nonrewirable type and
in the event of the socket outlet in your home not be-
ing compatible with the plug supplied, cut-off the mains
plug.
• Refit with a suitable type, observing the wiring code giv-
en in 'To replace the mains plug' on page
WARNING: THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring
code given in 'To replace the mains plug' on page
GB-30.
User_manual_R861_WEST.indb 15
GB-15
GB-30.
2016-08-16 21:23:10