Handy Operations; Playing At A Different Speed (Pitch) - Denon DN-C680 Instrucciones De Operación

5 HANDY OPERATIONS

2
B
PROFESSIONAL CD PLAYER DN-C680
POWER
OPEN/CLOSE
ON OFF
¢ £
LEVEL
PROG. PLAY PROGRAM
ON/OFF
PUSH ENTER
MIN MAX 8
STOP STANDBY/CUE PLAY/PAUSE
PHONES
PRESET
3
(1) Starting Playback from the Middle of a Track (Manual
Search)
¥ When a track is selected and the PLAY/PAUSE button is
pressed, playback starts from the beginning of that track. To
start from a different position in the track, use the procedure
described below to find the desired position.
Find the play start position.
Turn the SEARCH dial.
When the SEARCH dial (inner side) is
SEARCH I 6 7 SCAN
turned, the frame move mode is set. The
playback position moves one frame for
each click.
1-
1
Backward Forward
When the dial is turned clockwise, the playback position moves as
follows:
m s f
Listen to the sound and find the desired play start position.
Turn the SCAN dial to change the playback position quickly.
The fast forward/reverse mode is set when
I
SEARCH 6 7 SCAN
the SCAN dial (outer side) is turned. The
1-
2
speed changes according to the angle at
which the dial is turned.
Backward Forward
To check the play start position:
Press the PLAY/PAUSE button.
PLAY/PAUSE PLAY/PAUSE
2 Playback starts.
Lit
Monitor the play signal to check the play start position.
Cue the play start position.
Press the STANDBY/CUE button.
Flashing
3
Lit
The pickup returns to the play start position and the standby
mode is set.
FINISH MODE SEARCH I SCAN
6 7
IN PLAY MODE END MON AUTO CUE TIME STOP
PITCH REPEAT
9
AUTO SPACE INDEX NEXT
I A
AUTO EDIT FADER RECUE
B
1 ,1
-1 -2
f f
Lit
B
PROFESSIONAL CD PLAYER DN-C680
POWER
OPEN/CLOSE
¢ ON £ OFF
LEVEL
PROG. PLAY
ON/OFF
PUSH ENTER
MIN MAX 8
STOP STANDBY/CUE PLAY/PAUSE
PHONES
PRESET
1
-1

(2) Playing at a Different Speed (Pitch)

¥ Use this function to play discs at different speeds.
¥ The speed can be changed within the range of Ð 9.9 to +9.9%.
Set the play speed.
(1) To increase the speed:
Press the Ò + Ó button.
PITCH %
I
1-
1
The speed increases by 0.1% each time the button is
pressed. If the button is held in, the speed changes
continuously.
(2) To decrease the speed:
Press the Ò Ð Ó button.
PITCH %
1-
2
The speed decreases by 0.1% each time the button is
pressed. If the button is held in, the speed changes
continuously.
Set the pitch play mode.
Press the PITCH button.
PITCH PITCH
2
Lit
The button lights and the set play speed is set.
NOTE: When the PITCH button is lit, the play speed can be
changed by pressing the Ò + Ó and Ò Ð Ó
NOTES:
¥ When the play speed (PITCH) is set, the display shows the
set pitch, but the disc is played at the standard speed until
the PITCH button is pressed (and the button is lit).
¥ When the play speed is changed, the sampling frequency of
the digital output signal also changes, so it may not be
possible to receive digital signals.
ENGLISH
2
PROGRAM
FINISH MODE
SEARCH I 6 7 SCAN
IN
PLAY MODE END MON AUTO CUE TIME STOP
PITCH REPEAT
9 AUTO SPACE INDEX NEXT
I A
AUTO EDIT FADER RECUE
B
1
-2
PITCH % PITCH %
PITCH % PITCH %
buttons.
15