INTRODUCTION
Thank you for purchasing this model by Generac Power Systems, Inc.
This model is a compact, high performance, air-cooled, engine driven
generator designed to supply electrical power to operate electrical loads
where no utility power is available or in place of utility due to a power
outage.
READ THIS MANUAL THOROUGHLY
If any portion of this manual is not understood, contact the nearest
Authorized Dealer for starting, operating and servicing procedures.
The operator is responsible for proper and safe use of the equipment. We
strongly recommend that the operator read this manual and thoroughly
understand all instructions before using the equipment. We also strongly
recommend instructing other users to properly start and operate the
unit. This prepares them if they need to operate the equipment in an
emergency.
The generator can operate safely, efficiently and reliably only if it is
properly located, operated and maintained. Before operating or servicing
the generator:
• Become familiar with and strictly adhere to all local, state and national
codes and regulations.
• Study all safety warnings in this manual and on the product carefully.
• Become familiar with this manual and the unit before use.
The manufacturer cannot anticipate every possible circumstance that
might involve a hazard. The warnings in this manual, and on tags and
decals affixed to the unit are, therefore, not all inclusive. If using a
procedure, work method or operating technique that the manufacturer
does not specifically recommend, ensure that it is safe for others. Also
make sure the procedure, work method or operating technique utilized
does not render the generator unsafe.
THE INFORMATION CONTAINED HEREIN WAS BASED ON MACHINES IN
PRODUCTION AT THE TIME OF PUBLICATION. GENERAC RESERVES THE
RIGHT TO MODIFY THIS MANUAL AT ANY TIME.
SAFETY RULES
Throughout this publication, and on tags and decals affixed to the
generator, DANGER, WARNING, CAUTION and NOTE blocks are used to
alert personnel to special instructions about a particular operation that
may be hazardous if performed incorrectly or carelessly. Observe them
carefully. Their definitions are as follows:
Indicates a hazardous situation or action which, if not
avoided, will result in death or serious injury.
Indicates a hazardous situation or action which, if not
avoided, could result in death or serious injury.
Indicates a hazardous situation or action which, if not
avoided, could result in minor or moderate injury.
Netzerotools.com
Notes contain additional information important to a procedure and will
be found within the regular text body of this manual.
These safety warnings cannot eliminate the hazards that they indicate.
Common sense and strict compliance with the special instructions while
performing the action or service are essential to preventing accidents.
Four commonly used safety symbols accompany the DANGER, WARNING
and CAUTION blocks. The type of information each indicates is as
follows:
• NEVER operate in an enclosed area, in a vehicle, or indoors EVEN IF
• For safety reasons, the manufacturer recommends that the maintenance
• Operate generator only on level surfaces and where it will not be
• Keep hands, feet, clothing, etc., away from drive belts, fans, and other
• Certain parts of the generator get extremely hot during operation. Keep
• Do NOT operate generator in the rain.
• Do not alter the construction of the generator or change controls which
• Never start or stop the unit with electrical loads connected to
• When working on this equipment, remain alert at all times. Never work
• Never use the generator or any of its parts as a step. Stepping on the
Netzerotools.com
NOTE:
This symbol points out important safety
information that, if not followed, could endanger
personal safety and/or property of others.
This symbol points out potential explosion hazard.
This symbol points out potential fire hazard.
This symbol points out potential electrical shock
hazard.
GENERAL HAZARDS
doors and windows are open.
of this equipment is carried out by an Authorized Dealer. Inspect the
generator regularly, and contact the nearest Authorized Dealer for parts
needing repair or replacement.
exposed to excessive moisture, dirt, dust or corrosive vapors.
moving parts. Never remove any fan guard or shield while the unit is
operating.
clear of the generator until it has cooled to avoid severe burns.
might create an unsafe operating condition.
receptacles AND with connected devices turned ON. Start the engine
and let it stabilize before connecting electrical loads. Disconnect all
electrical loads before shutting down the generator.
on the equipment when physically or mentally fatigued.
unit can stress and break parts, and may result in dangerous operating
conditions from leaking exhaust gases, fuel leakage, oil leakage, etc.
Introduction
1