Descargar Imprimir esta página

MTD 700 Serie Manual Del Operador página 5

Ocultar thumbs Ver también para 700 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly & Set-Up
Thank You
Thank you for purchasing this product. It was carefully engineered to
provide excellent performance when properly operated and maintained.
Please read this entire manual prior to operating the equipment. It
instructs you how to safely and easily set up, operate and maintain your
machine. Please be sure that you, and any other persons who will operate
the machine, carefully follow the recommended safety practices at all
times. Failure to do so could result in personal injury or property damage.
All information in this manual is relative to the most recent product
information available at the time of printing. Review this manual frequently
to familiarize yourself with the machine, its features and operation. Please
be aware that this Operator's Manual may cover a range of product
specifications for various models. Characteristics and features discussed
Contents of Carton
Snow Thrower (1)
Replacement Auger Shear Pins (2-4)
Snow Thrower Operator's Manual (1)
Carriage Screw† (2)
NOTE: This Operator's Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the
model depicted may differ from yours. Refer to Figure 2-1 which shows the different versions and match the contents of carton (chute and directional
control rod/flex shaft) to identify your specific unit.
Overhead
Chute
Control
Rod
Overhead Chute Control
(with Chute Control Rod)
Page 7
Chute Assembly (1)
Safety Key (2)
Engine Operator's Manual (1)
Flange Lock Nut† (2)
Chute Assembly
Chute
Control
Rod
2-Way & 4-Way Chute Control
Chute
Assembly
Electric Chute Control
Figure 2-1
and/or illustrated in this manual may not be applicable to all models. We
reserve the right to change product specifications, designs and equipment
without notice and without incurring obligation.
If applicable, the power testing information used to establish the power
rating of the engine equipped on this machine can be found at www.opei.
org or the engine manufacturer's web site.
If you have any problems or questions concerning the machine, phone your
local authorized service dealer or contact us directly. We want to ensure
your complete satisfaction at all times.
Throughout this manual, all references to right and left side of the machine
are observed from the operating position.
Chute Assembly
Page 8-9
(with Flex Shaft and Steel Chute)
Manual Chute
Control Rod
Page 10-11
Chute Control Rod or Flex Shaft
Assembly† (1)
Parts/Warranty Document (1)
Product Registration Card (1)
† If Equipped
Chute Assembly
Flex Shaft
Overhead Chute Control
Pages 9-10
2
5

Publicidad

loading