Product Safety Information; Product Specifications - Ingersoll Rand 772 Manual Del Usario

Product Safety Information

Intended Use:
These Air Percussive Hammers are designed for hammering, punching, cutting, chipping and
scraping material through repetitive application of linear impacts of a tool steel that is retained
and driven by the Hammer.
For additional information refer to Air Percussive Tool Product Safety Information Manual
Form 04581450.
Manuals can be downloaded from www.irtools.com.
Prior to Use
● Do not lubricate tools with flammable or volatile liquids such as kerosene, diesel or jet
fuel. Use only recommended lubricants.
●
Use only proper cleaning solvents to clean parts. Use only cleaning solvents which meet
current safety and health standards. Use cleaning solvents in a well ventilated area.
Tools are coated inside and out with rust-resisting oil before leaving the factory. Before using the
tool, remove this oil by dipping the tool in a suitable cleaning solution to wash the oil from the
exterior. Pour about 6 cm
tool for about 15 seconds. Dry the tool immediately after cleaning, pour 3 cm
No. 10 Oil into the air inlet and again operate the tool for 5 seconds to lubricate all working parts.

Product Specifications

Type of
Model
Handle
772 Pistol Grip
† K = 3dB measurement uncertanity
pA
‡ K = 3dB measurement uncertanity
wA
03525763_ed11
WARNING
of a clean, suitable, cleaning solution into the air inlet and operate the
3
Stroke
Blows per
Length
Minute
Inch (mm) † Pressure (L
3,000 2-1/4 (57)
of Ingersoll Rand
3
Sound Level dB (A)
(ISO15744)
) ‡ Power (L
p
95.3 106.3
EN
Vibration
Level
(ISO8662)
) m/s
2
w
10.8
EN-1