Return - WIKA TGS55 Manual De Instrucciones

8. Dismounting, return and disposal
WARNING!
Physical injury
When dismounting, there is a danger from aggressive media
and high pressures.
EN
▶
▶

8.2 Return

Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of
hazardous substances (acids, bases, solutions, etc.) and must therefore
be cleaned before being returned.
WARNING!
Physical injuries and damage to property and the
environment through residual media
Residual media in the dismounted instrument can result in a
risk to persons, the environment and equipment.
▶
▶
When returning the instrument, use the original packaging or a suitable
transport packaging.
To avoid damage:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with the shock-absorbent material, in the
packaging. Place shock-absorbent material evenly on all sides of the
transport packaging.
3. If possible, place a bag, containing a desiccant, inside the packaging.
4. Label the shipment as transport of a highly sensitive measuring
instrument.
Information on returns can be found under the heading
"Service" on our local website.
28
Observe the information in the material safety data sheet
for the corresponding medium.
Only disconnect the thermometer once the system has
been depressurised.
With hazardous substances, include the material safety
data sheet for the corresponding medium.
Clean the instrument, see chapter 7.2 "Cleaning".
WIKA operating instructions models TGS55, TGS73 with 831 (Ex)