Bluetooth Connection Settings - Nokia 5700 XpressMusic Manual Del Usuario

Check with the manufacturers of other devices to determine their compatibility with
this device.
There may be restrictions on using Bluetooth technology in some locations. Check with your
local authorities or service provider.
Features using Bluetooth technology, or allowing such features to run in the background while
using other features, increase the demand on battery power and reduce the battery life.

Bluetooth connection settings

Select Menu > Settings > Connectivity > Bluetooth.
When you activate Bluetooth technology for the first time, you are asked to give a name to
your phone.
Bluetooth—to switch Bluetooth on or off.
My phone's visibility > Shown to all—to allow your phone to be found by other Bluetooth
devices at all times. To allow your phone to be found for a defined time period, select Define
period. For security reasons it is advisable to use the Hidden setting whenever possible.
My phone's name—to define a name for your phone.
Remote SIM mode > On—to enable the usage of the SIM card of the phone by another device
(for example, a car kit) by Bluetooth technology (SIM access profile)
When the wireless device is in the remote SIM mode, you can only use a compatible connected
enhancement, such as a car kit, to make or receive calls. Your wireless device will not make
any calls, except to the emergency numbers programmed into your device, while in this
mode. To make calls from your device, you must first leave the remote SIM mode. If the
device has been locked, enter the lock code to unlock it first.
Send data
1. Open an application where the item you wish to send is saved.
2. Scroll to the item you want to send, and select Options > Send > Via Bluetooth.
3. The phone starts to search for devices within range. Paired devices are shown with
When searching for devices, some devices may show only the unique device addresses.
To find out the unique address of your phone, enter the code *#2820# in the standby
mode.
If you have searched for devices earlier, a list of the devices that were found previously is
shown first. To start a new search, select More devices.
4. Select the device with which you want to connect.
5. Pair the devices
• If the other device requires pairing before data can be transmitted, a tone sounds and
you are asked to enter a passcode.
72
.