Voice Commands; Bluetooth; Bluetooth Wireless Technology; Set Up A Bluetooth Connection - Nokia 6300b Manual Del Usuario

S e t t i n g s

Voice commands

Call contacts and carry out device functions by speaking a voice command.
Voice commands are language-dependent, and you must set the
"Phone," p. 24.
To select the device function to activate with a voice command, select
commands and a folder. Scroll to a function.
To play the activated voice command, select Play.
To manage the voice commands, scroll to a device function, and select
Edit or Remove — to change or deactivate the voice command of the selected function
•
Add all or Remove all
•

Bluetooth

Bluetooth wireless technology

Bluetooth technology allows you to connect the device to a compatible Bluetooth device within 10 meters (32 feet). Since devices
using Bluetooth technology communicate using radio waves, your device and the other devices do not need to be in direct line-
of-sight, although the connection can be subject to interference from obstructions such as walls or from other electronic devices.
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the following profiles: generic access, network access,
generic object exchange, advanced audio distribution, audio video remote control, hands-free, headset, object push, file transfer,
dial-up networking, SIM access, and serial port. To ensure interoperability between other devices supporting Bluetooth
technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine
their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.
Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase
the demand on battery power and reduce the battery life.

Set up a Bluetooth connection

Select Menu Settings
>
Bluetooth — Select On
•
My phone's visibility
•
Search audio enhanc.
•
the phone.
Active devices — to check which Bluetooth connection is currently active
•
Paired devices — to search for any Bluetooth device in range. Select
•
device and Pair. Enter an agreed Bluetooth passcode of the device (up to 16 characters) to pair the device to your device. You
must only give this passcode when you connect to the device for the first time. Your device connects to the other device, and
you can start data transfer.
My phone's name — to set the device name for Bluetooth connections
•
If you are concerned about security, turn off the Bluetooth function, or set
Bluetooth communication from others whom you trust.

Packet data

General packet radio service (GPRS) is a network service that allows mobile devices to send and receive data over an internet
protocol (IP)-based network.
To define how to use the service, select
the following options:
When needed — to set the packet data connection to established when an application needs it. The connection will be
•
closed when the application is terminated.
Always online — to set the device to automatically connect to a packet data network when you switch the device on.
•
You can connect the device using Bluetooth wireless technology or USB data cable connection to a compatible PC and use the
device as a modem to enable GPRS connectivity from the PC.
To define the settings for connections from your PC, select
settings Active access
>
point, enter a name to change the access point settings, and select OK. Select
(APN) to establish a connection to a network, and select OK.
© 2007 Nokia. All rights reserved.
indicates that the voice tag is activated. To activate the voice tag, select Add.
— to activate or deactivate voice commands to all functions in the voice commands list
Connectivity Bluetooth
> >
to activate the Bluetooth function.
— to define how your device is shown to other Bluetooth devices
— to search for compatible Bluetooth audio devices. Select the device that you want to connect to
Menu Settings
>
point, and activate the access point you want to use. Select
Recognition lang.
Menu
See "Enhanced voice dialing," p. 13.
Options
and from the following options:
indicates that Bluetooth is activated.
New
My phone's visibility
Connectivity
>
Menu Settings
>
22
before using voice commands.
Settings My shortcuts
> >
and from the following:
to list any Bluetooth device in range. Select a
to Hidden. Always accept only
Packet data Packet data conn.
> >
Connectivity Packet data
> >
Edit active access pt.
Packet data acc. pt., enter the access point name
See
Voice
>
and from
Packet data
>
Alias for access
>