Maintenance: Cleaning The Filter, Dirt Cup And Separator - Hoover Fusion Manual Del Usuario

Maintenance: Cleaning the Filter, Dirt Cup and Separator

1
3
WARNING
To reduce the risk of personal injury, remove battery
before cleaning or servicing.
18
Remove the Reach Wand. Press
the Dirt Cup release button and
pull the Dirt Cup away.
To clean the separator, lift to remove. Clean
dirt & debris, then place back into dirt cup.
IMPORTANT
Do not use soap or other chemicals to clean. Dry filter completely, for up to 24 hours, before
reinstalling into the product.
Pull the filter away and tap over a
trash bin to remove dirt. Rinse filter
under warm water until water is clear.
Allow filter to dry for 24 hours or until
completely dry before reinstalling.
2
To reassemble, align the hook to the
front. Push the dirt cup backwards,
until it locks in place.
4